Crestron-electronic TPS-GA-TPI User Manual download pdf (Page 38)

Isys

G-Series Touchpanel Interface Crestron TPS-GA-TPI

8. Calibrate the touchscreen by selecting Functions | Setup Mode | Enter

Calibration Mode in the Toolbox System Info window.

USB Connection

1. Connect the RGBHV OUT to the RGB in on the touchscreen.

2. Connect to the TPS-GA-TPI via serial or TCP/IP communication as described in

“Establishing Communication” on page 42.

3. Using the Toolbox Text Console, enter the EXTT command to set the

TPS-GA-TPI for the touchscreen you have connected.

4. Using the Toolbox Text Console, enter the TPIMODE command to set the

TPS-GA-TPI to the native resolution of the touchscreen. Refer to the

touchscreen documentation to determine its native resolution.

5. Attach a USB cable assembly between the touchscreen and the TPS-GA-TPI.

6. Reboot the TPS-GA-TPI and the touchscreen.

7. Calibrate the touchscreen by selecting Functions | Setup Mode | Enter

Calibration Mode in the Toolbox System Info window.

34 • Isys

G-Series Touchpanel Interface: TPS-GA-TPI Operations Guide – DOC. 6609A

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 55 56

No comments

Crestron-electronic TPS-GA-TPI User Manual Page 38